Solar and Wind Power

There are quite a number of companies today who don’t just supply home wind generators, but also install them for you, however these can be quite expensive. If you are thinking about installing this renewable energy source in your home and your budget is tight, you may want to think about building a wind generator yourself.

What you may not realize is that if you build it yourself it may only cost you between $100 – 200 to do so, rather than the thousands that some companies charge. Simply put, building a wind generator can prove a very wise investment indeed. You will in fact probably find that your electricity bills over the next 3 years will be reduced by thousands of dollars.

Something else that you may not realize when thinking of building a wind generator yourself is that the majority of parts you need can be bought at your local hardware store or online for under $200. So thinking that getting the parts is going to be a problem is something you need not be concerned about.

Now before you consider building a wind generator for your home, there are a number of factors that will need to be taken into consideration beforehand. In this article we look at just what some of these factors are. If you keep these in mind before, during, and after you have constructed your system then you can be confident in knowing that it will last for many years to come.

Tip 1: The Base – You need to provide your wind generator with a firm sturdy base that provides sufficient support for it. The best material from which the base should be constructed is concrete, as this will allow the supports of the wind generator to be held firmly in place no matter how fast and strong the wind is blowing.

Tip 2: The Tower – The tower itself is best made from metal, however you can construct it from plywood, but you need to ensure that you use the thickest plywood possible. This will ensure that the tower is sturdy andcan cope with the effects of wind blowing against it.

Tip 3: The Turbine Blades – The blades you build or buy need to turn smoothly without any friction or any chance of them becoming hindered. If you’ve never built wind generator blades before you may want to buy premade quality blades, which will ensure that they provide you with ample amounts of energy. These can be purchased pretty cheaply at websites like eBay.

If you are intending to make your blades from plywood then you need to use strong wood to make them from. Plus, make sure that the size of the blades are in proportion to the height of the tower. Too large and the tower will break because they are too heavy and too small and they won’t be able to create enough energy to meet your requirements.

Tip 4: The Gearbox – When you are thinking of building a wind generator you need to pay close attention to what the gearbox is to be constructed from. If you use inferior quality materials or equipment this can result in the blades being unable to turn as freely as they should and so the amount of energy they produce is reduced. If you decide to buy a gearbox instead of building one, make sure you purchase a complete working gearbox that is specifically designed for installation into wind generator system.

If you’re ready to save thousands and break free from energy dependence go to BuildingaWindGenerator.com for more info related to building a Wind Generator!